VKI Technologies CAFFÈ MIO Operation & Service Manual page 59

R e p l a c i n g M a j o r C o m p o n e n t s
16. Connect the inlet valve hose to the inlet fitting (rear fitting) at the bottom of the water tank, and
use a hose clamp to secure it in place. Make sure the drain plug is also down and locked.
17. Connect the respective hoses to all three outlet valves.
a) Remove the coffee hose from the brewer and connect it to the coffee valve.
18. Connect the power and ground wires to each of the outlet valves.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Inlet Hose
#13-6
#13-4
Coffee Hose
WIRES
#2 and #1-7
(#13-5 is ground)
#3 and #1-8
(#13-6 is ground)
#4 and #1-6
(#13-4 is ground)
5 – R E P L A C I N G
Hot Water Hose
Chocolate Hose
CONNECTED TO:
Hot Water Valve
Chocolate Valve
Coffee Valve
C O M P O N E N T S
Page 59 of 110