Inlet Valve - VKI Technologies Eccellenza Pod Service Manual

Eccellenza Pod

Inlet Valve

1. Switch the machine power off and unplug the service cord from the wall
outlet.
2. Disconnect the water supply and remove the inlet fitting from the inlet
valve.
3. Remove the rear panel from the machine and drain the water tank.
4. Remove the circle clamp and remove the inlet valve's outlet hose.
5. Disconnect the power wires from both of the inlet valve solenoids.
6. Compress the clip on the right side of the inlet valve, and push the right side of the
valve through the opening in the metal and remove the valve.
Replacing Components
47