VKI Technologies CAFFÈ MIO Operation & Service Manual page 69

R e p l a c i n g M a j o r C o m p o n e n t s
6. Carefully pull the temperature probe's wiring out the top of the machine.
a) Any tie-wraps securing the temperature probe wiring to the main water tank wiring harness
will need to be cut.
7. Install the new probe into the grommet on the water tank top.
8. Drop the temperature probe connector (harness) down the front of the water tank (valve area)
and route it to the rear board.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N 5
Temperature Probe
Grommet
Temp. Probe Wiring
– R E P L A C I N G C O M P O N E N T S
Page 69 of 110