VKI Technologies CAFFÈ MIO Operation & Service Manual page 53

R e p l a c i n g M a j o r C o m p o n e n t s
11. Re-connect the two brewer harnesses and the ground wire to the rear board.
12. Re-install the brewer bracket assembly onto the left wall of the machine.
a) Make sure the bracket goes over the three loosened screws.
b) Tighten the screws to secure the bracket to the wall.
13. Replace the brewer.
a) See "Replacing the
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Brewer Harness
Tighten
Tighten
Brewer" section for more details.
5 – R E P L A C I N G
Rear Circuit
Board
Tighten
Brewer Bracket
C O M P O N E N T S
Page 53 of 110