Brewer Bracket / Brewer Motor - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Brewer Bracket / Brewer Motor

1. With the machine power OFF, remove the brewer.
a) See "Replacing the
2. Remove the brewer bracket.
a) Loosen, but do not remove, the three screws from the left side of the brewer bracket.
b) Lift the bracket clear of the screws and pull it away from the wall.
c) Disconnect the two brewer harnesses and the ground wire from the rear board.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Brewer" section for more details.
Loosen
Loosen
Brewer Harness
5 – R E P L A C I N G
Loosen
Brewer Bracket
Rear Circuit
Board
C O M P O N E N T S
Page 50 of 110