VKI Technologies CAFFÈ MIO Operation & Service Manual page 83

R e p l a c i n g M a j o r C o m p o n e n t s
4. Remove the front circuit board assembly from the front door.
Remove
Remove
Remove
a) Remove the 8 screws securing the front circuit board to the front door.
b) Remove the 4 screws securing the LCD display to the front door.
c) Carefully lift the circuit board assembly up and out of the door.
NOTE: When the front circuit board is removed, the selection switch caps and a sponge foam
spacer will be exposed. These switch caps and the foam spacer must be present on
the door when the front circuit board is re-installed.
Front Circuit Board
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Remove
Front Circuit
Board
View (inside door) with front circuit board removed
5 – R E P L A C I N G
Remove
Remove
Remove
Remove
Remove
Remove
C O M P O N E N T S
Remove
LCD
Display
Remove
Page 83 of 110