VKI Technologies CAFFÈ MIO Operation & Service Manual page 51

R e p l a c i n g M a j o r C o m p o n e n t s
3. Loosen the two upper screws securing the motor to the bracket.
4. Remove the two lower screws securing the motor to the bracket.
5. Remove the brewer motor assembly from the brewer bracket.
6. Disconnect the power wires (#8 and #9) from the brewer motor.
7. Remove the switch plate assembly from the old brewer motor.
a) Remove the three screws that secure the switch plate to the motor.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Brewer Bracket
Loosen
Remove
Remove Screw
Brewer Motor
Remove Screw
5 – R E P L A C I N G
Loosen
Brewer
Motor
Remove
Remove Screw
Switch Plate
C O M P O N E N T S
Page 51 of 110