Zuma Brewer - Brew Chamber Tension Adjustment - VKI Technologies CAFFÈ MIO Operation & Service Manual

B r e w e r A d j u s t m e n t s
Zuma Brewer – Brew Chamber Tension Adjustment
Too Loose – Side View
The wiper is not touching the surface of the cylinder and
filter screen.
Perfect Tension – Side View
The wiper is gently touching the surface of the cylinder &
filter screen. A slight deformation is seen on the wiper.
Too Tight – Side View
The wiper is stretched and extremely deformed. The brewer
is under extreme pressure.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Figure 1 Figure 2
No bend on the wiper because it is not touching the surface
of the cylinder and filter screen.
Figure 3 Figure 4
Slight bend on the wiper. All coffee grounds will be removed
from the surface of the filter screen.
Figure 5* Figure 6*
Very pronounced bend on the wiper. The wiper arm and
vertical rod housing are under extreme pressure.
3 - M A I N T E N A N C E
Too Loose – Front View
Perfect Tension – Front View
Too Tight – Front View
Page 27 of 110