R e p l a c i n g M a j o r C o m p o n e n t s
16. Slide the rear of the dispenser support into the cutout on the base, and push the dispenser back
to couple it with the motor. The pin at the bottom of the dispenser will go into the notch on the
base to help guide the dispenser into position.
Support Cutout
17. Screw the front of the dispenser to the dispenser base.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Ingredient Dispenser
Support
Dispenser Base
Install
5
–
R E P L A C I N G
Guide Pin
Notch
Install
C O M P O N E N T S
Page 78 of 110