Ingredient Dispenser Motor - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Ingredient Dispenser Motor

1. With machine power OFF, open the front door and open the machine lid.
2. Remove the brewer.
a) Refer to the
3. Remove the brewer bracket.
a) Refer to the
4. Remove the spill plate that surrounds the two dispensers.
a) Remove the screws at the front and rear of the spill plate securing it to the top of the machine.
b) Remove the lids on both of the dispensers.
c) Slide the spill plate up and over the dispensers to remove it.
Spill Plate
5. Rotate both ingredient dispenser spouts upwards.
6. Remove the screw securing the front of each dispenser to the dispenser base.
CAFFÈ MIO – OPERATION AND SERVICE
"Replacing the Brewer" instructions in this manual.
"Replacing the Brewer
Remove Screw
Remove Lid
Remove Lid
Remove Screw
Remove
S E C T I O N 5 – R E P L A C I N G
Bracket" instructions in this manual.
Spill Plate and Dispenser
Lids Removed
Remove
C O M P O N E N T S
Page 74 of 110