Brewer - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Brewer

1. Press the "
SET
a) The display now reads "
2. Press the "
COFFEE
a) The brewer motor will now cycle and stop with the brew chamber in the open position.
3. Release the brewer lock pin.
a) Lower the lock pin by pulling it down all the way.
b) Turn the pin to the left until it is directly below the flange, and release.
4. Remove the old brewer from the brewer bracket.
a) Disconnect the coffee hose from the top of the brewer.
b) Gently grasp the brewer with one hand on the top, and the other hand on the bottom.
c) Move the brewer to the right until it clears the front of the bracket, and pull it towards you
until it is free from the bracket.
CAFFÈ MIO – OPERATION AND SERVICE
- " button on the interior panel.
UP
TO OPEN BREWER
" button on the front selection panel.
Locked
Position
S E C T I O N 5 – R E P L A C I N G
–
PRESS PRODUCT
Set-Up Button
Interior
Panel
C O M P O N E N T S
".
Unlocked
Position
Page 47 of 110