VKI Technologies CAFFÈ MIO Operation & Service Manual page 73

R e p l a c i n g M a j o r C o m p o n e n t s
10. Screw the front of the dispenser to the dispenser base.
11. Re-install the spill plate (foam side down) over the dispensers onto the top of the machine and
secure it in place using the two screws.
12. Install the dispenser covers onto the dispensers.
13. Rotate the spouts down into their proper positions.
14. Close the inner door and front door.
15. Test brew a couple of cups of coffee or chocolate to verify dispenser operation.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Install
Replace Lid
Spill Plate
Install Screw
5 – R E P L A C I N G
Install
Install Screw
Replace Lid
C O M P O N E N T S
Page 73 of 110