VKI Technologies CAFFÈ MIO Operation & Service Manual page 44

R e p l a c i n g M a j o r C o m p o n e n t s
10. Attach the hoses.
a) The brown hose goes onto the coffee valve, the hose to the whipper goes onto the chocolate valve,
and the hose going to the door goes onto the hot water valve.
11. Reconnect the coffee hose (brown) to the brewer.
12. Turn on the water supply to the machine.
13. Switch ON the power to the machine.
14. Allow the water tank to fill and check for leaks.
15. Verify the operation of each valve.
a) Test brew a cup of coffee and a cup of hot chocolate.
b) Dispenser a cup of hot water.
16. Switch the machine power OFF.
17. Replace the valve cover.
a) Slide the right side over the two loosened screws.
b) Secure the left side with another screw.
c) Tighten the two screws on the right side.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
Brewer
Valve Cover
Tighten
Install
Tighten
5 – R E P L A C I N G C O M P O N E N T S
Page 44 of 110