Fuse Box Assembly - VKI Technologies CAFFÈ MIO Operation & Service Manual

R e p l a c i n g M a j o r C o m p o n e n t s

Fuse Box Assembly

WARNING: To prevent electrical shock, always disconnect the service cord
from the wall outlet when working on the fuse box. Even with the main
power switch in the OFF position, parts of the fuse box will remain live.
1. With machine power OFF, disconnect the service cord from the wall outlet.
2. Open the front door, the inner door, and remove the waste bin.
3. Remove the brewer.
a) Refer to the
4. Remove the brewer bracket.
a) Refer to the
5. Disconnect the wiring coming out of the fuse box.
a) Disconnect the ground wire from the terminal on the left wall of the machine.
b) Disconnect the wires connected to the door harness and water tank harness (3 total).
c) Disconnect the wire connected to the heater relay.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
"Replacing the Brewer" instructions in this manual.
"Replacing the Brewer
Disconnect
5 – R E P L A C I N G
Bracket" instructions in this manual
Disconnect
C O M P O N E N T S
Page 99 of 110