VKI Technologies CAFFÈ MIO Operation & Service Manual page 106

R e p l a c i n g M a j o r C o m p o n e n t s
4. Remove the thermal cut-off switch.
a) Disconnect the wire from the thermal cut-off switch to the heater element.
b) Loosen the clamp securing the thermal cut-off switch to the heater element.
c) Remove the two screws and hex nuts securing the thermal cut-off switch to the tank lid.
d) Remove the old thermal cut-off switch by pulling it out the top of the tank lid.
CAFFÈ MIO – OPERATION AND SERVICE
Disconnect
Loosen Clamp
S E C T I O N 5 – R E P L A C I N G
Thermal Cut-Off
Remove
Remove
C O M P O N E N T S
Page 106 of 110