VKI Technologies CAFFÈ MIO Operation & Service Manual page 88

R e p l a c i n g M a j o r C o m p o n e n t s
13. Connect all of the wiring connections and ground connections (green wires) to the rear circuit
board.
14. Install the brewer bracket.
a) Refer to the
15. Install the brewer.
a) Refer to the
16. Replace the waste bin.
17. Switch the machine power ON and allow the unit to fill and heat.
18. Test the equipment to make certain everything is working properly.
a) Refer to the
NOTE: It may be necessary to re-adjust product, water and/or bottom pause settings after
replacing the rear circuit board. Also note that counter readings are stored in the rear
circuit board and may be lost if the board is completely inoperative and is replaced.
CAFFÈ MIO – OPERATION AND SERVICE
Fuse Box
Connect
Connect
"Replacing the Brewer
"Replacing the Brewer" instructions in this manual.
"Testing Equipment
S E C T I O N 5 – R E P L A C I N G
Rear Circuit
Board
Bracket" instructions in this manual.
Operation" section of this manual.
C O M P O N E N T S
Install Screw
Water Tank
Area
Page 88 of 110