VKI Technologies CAFFÈ MIO Operation & Service Manual page 58

R e p l a c i n g M a j o r C o m p o n e n t s
14. Connect the temperature probe harness to the rear circuit board.
a) Route the harness down the front of the water tank and connect it to the rear circuit board.
15. Connect the wires identified in the table and photo below.
CAFFÈ MIO – OPERATION AND SERVICE
S E C T I O N
#1-2
WIRE # CONNECTED TO:
#11-2 Heater element
#14 Thermal cut-off switch
#1-2
Level probe - long
#4-3 Level probe - long
#5-2 Level probe - short
5 – R E P L A C I N G
#4-3
#5-2
#11-2
#14
C O M P O N E N T S
Page 58 of 110