Mahindra XUV 500 Diagnostic Manual page 266

DIAGNOSTIC MANUAL
BOOST PRESSURE MODULATOR
The boost pressure modulator controls the variable vanes of the VGT to attain the desired boost pressure
thru controlling the vacuum to boost pressure actuator .In normal operation and during an actuator test,
the PWM power stage of ECU is tested for short circuit to battery voltage, short circuit to ground, open
circuit and excess temperature. Once the errors are confirmed, the power stage is switched off.
COMPONENT LOCATION
NORMAL

OPERATION
DTC DETECTING

CONDITION
PROBABLE

CAUSES


LAMP STATUS

DTC REACTION



HEALING
CONDITION
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
P0047 - Boost pressure modulator short circuit to ground
When ignition ON , no malfunction detected by EMS ECU in the boost
pressure modulator circuit
Short to ground is detected in boost pressure modulator circuit
Short in boost pressure modulator circuit
Faulty boost pressure modulator
Faulty EMS ECU
OBD lamp ON
EGR switches OFF
Boost pressure actuator will not work
Ignition OFF/ON
EMS
MAN-00152
OCT 2011/Rev 1
265