The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the

manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,

are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,

EMS

P1341 - Camshaft sensor signal offset error

During engine starting, the EMS ECU compares the crankshaft sensor signal

and cam shaft position sensor signal and the deviation is within the range

The cam shaft position sensor and crankshaft speed sensor are not

synchronized

Increased air gap between cam shaft position sensor and the trigger wheel

Increased air gap between crank shaft speed sensor and the trigger wheel

Sensor mountings loosened

Timing disturbed

System Check lamp ON

Engine will not start.