Mahindra XUV 500 Diagnostic Manual page 328

DIAGNOSTIC MANUAL
Reason for Torque Limitation
Note the value of Current limitations active label in Monitoring live data pocket
Convert it into binary.
See the bit position of first occurrence of "1" from right and look against the bit position in the table
below
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
Bit Position Reason for Torque Limitation
Limiting torque due to torque limitation
0
in the event of a system error
Limiting torque for differential
1
protection
Limiting torque for engine mechanics
2
protection
3 Limiting torque for smoke limitation
Limiting torque due to quantity
4
limitation in the event of a system error
Limiting torque for protection against
5
overheating
Limiting torque for the propulsion in the
6
event of a system error
7 Maximum gearbox input torque
Limiting torque due to injection quantity
8
limitation from T3Lim
Limiting torque due to high pressure
9
pump unit
Limiting torque due to inner engine
13
torque
14 Limiting torque for engine protection
MAN-00152
OCT 2011/Rev 1
327