Mahindra XUV 500 Diagnostic Manual page 130

DIAGNOSTIC MANUAL
P0183 -Signal range check for fuel temperature sensor above maximum limit
FUEL TEMPERATURE SENSOR
The fuel temperature sensor is a variable resistor whose resistance changes as the temperature of the fuel
flowing past the sensor changes.(NTC resistor) When the fuel temperature is low, the sensor resistance is
high; when the fuel temperature is high, the sensor resistance is low.
COMPONENT LOCATION

NORMAL
OPERATION
DTC DETECTING

CONDITION

PROBABLE

CAUSES


LAMP STATUS

DTC REACTION


HEALING
CONDITION
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
During ignition ON , the measured output voltage value of the fuel temperature
sensor is between 0.1 to 3.3 V
The measured output voltage of the fuel temperature sensor is more than 3.3
V for 4 seconds
Open fuel temperature wiring harness
Short to battery of fuel temperature wiring harness
Faulty fuel temperature sensor
Faulty EMS ECU
No warning lamp indication
Engine will run with a default fuel temperature of 20 °C
Ignition OFF/ON
MAN-00152
OCT 2011/Rev 1
129