Mahindra XUV 500 Diagnostic Manual page 278

DIAGNOSTIC MANUAL
YES
Suspect faulty VSS
Replace VSS with anew one
Clear the DTC and verify
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
STEP 4
Ignition OFF
VSS wiring harness connector
DISCONNECTED
EMS ECU wiring harness
connector DISCONNECTED
Check the resistance between
pin 22 of the EMS ECU wiring
harness connector and pin 3 of
the VSS wiring harness
connector
Check the resistance between
pin 55 of the EMS ECU wiring
harness connector and pin 2 of
the VSS wiring harness
connector
Is the value < 1Ω?
MAN-00152
OCT 2011/Rev 1
NO
Examine the open circuit of the
VSS signal wire and ground wire
to EMS ECU
Repair/replace the wiring
harness
Clear the DTC and verify
277