Mahindra XUV 500 Diagnostic Manual page 314

DIAGNOSTIC MANUAL
GEAR NEUTRAL SENSOR
The gear neutral sensor is a inductive based sensor. It is mounted on the transaxle and detects the
movement of the of the shift sleeve through which it provides gear neutral position information
COMPONENT LOCATION

NORMAL
OPERATION

DTC DETECTING
CONDITION 
PROBABLE

CAUSES


LAMP STATUS


DTC REACTION


HEALING
CONDITION
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
P1704 - Gear Neutral Signal is not plausible
During ignition ON, on every gear change the gear lever passes through the
neutral position and a level transition in gear neutral signal .
The clutch signals are received every time a gear change is detected
Gear change detected without transition in gear neutral sensor signal
Loosened gear neutral sensor
Open /short wiring harness
Faulty gear neutral sensor
No lamp indication
Stop start system will not work
No updation of neutral position in instrument cluster
Ignition OFF/ON
MAN-00152
OCT 2011/Rev 1
313