Ems Ecu Flashing - Mahindra XUV 500 Diagnostic Manual

DIAGNOSTIC MANUAL
Select an injector, and click the button below the "Verify" line in figure. The IQA codes present in
the ECU will be read back and displayed in the text box before this button. It is recommended
that you carry out the verification activity whenever you change an IQA code.
PLEASE ENSURE TO PROGRAM IQA/IMA CODES WHEN YOU REPLACE AN INJECTOR, ECU or ENGINE.
The following are the fonts of the alphanumeric characters of the IQA/IMA code, as etched on
the injectors.

EMS ECU FLASHING

The EMS ECU required to be flashed in the following conditions
BLANK ECU
1. Procure blank EMS ECU from spare part dept.
1805AAA01571N ECU WITHOUT ETK EDC17C55*
* Check for the correct/latest part no in parts catalogue/Technical Service Bulletins.
2. Flash the EMS ECU dataset with a latest dataset as per TSB or at the advice of TEKline.
Notes -
1. Flash the EMS ECU with the correct/latest dataset. The matrix of the vehicles and the related latest
dataset will be released through TSB - if in doubt ask the TEKline.
2. Wrong dataset flashing may result in vehicle not starting and can lead to ECU failure.
Software
ECU Type
Version
V44 EDC17C55
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
Dataset ID
Factory/
1037519721
Reflashing
MAN-00152
OCT 2011/Rev 1
Type Model
XUV
500
12