Clear The Dtc And Verify - Mahindra XUV 500 Diagnostic Manual

DIAGNOSTIC MANUAL
STEP 2
Ignition ON
Using diagnostic tool , check
th
whether the 4 cylinder 7 digit
IQA code is written properly
Suspect EMS ECU malfunction
Replace EMS ECU with a new
one.
Check and verify for any new
DTC's
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
Connect the smart tester
Turn the ignition ON
Initialise the diagnostic tool
Record the DTC and clear
Turn ignition OFF
Turn ignition ON
Verify if P268F is present?
YES Is P268F present?
Is the IQA code
YES
written correctly?
STEP 1
MAN-00152
OCT 2011/Rev 1
NO
Intermittent problem exists
Refer the intermittent problem
inspection procedure
NO
Write the correct IQA code

Clear the DTC and verify

145