Mahindra XUV 500 Diagnostic Manual page 61

DIAGNOSTIC MANUAL
STEP 2
Ignition OFF
Coolant temperature sensor
wiring harness connector
DISCONNECTED
Ignition ON
Check the voltage between pin
1 of the coolant temperature
sensor wiring harness
connector and battery ground
STEP 3
Ignition OFF
Coolant temperature sensor
wiring harness connector
DISCONNECTED
Check the resistance between
pin 1 of the coolant
temperature sensor wiring
STEP 4
harness connector and battery
ground
Suspect EMS ECU malfunction
Replace EMS ECU with a new
one.
Check and verify for any new
DTC's
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2011 Mahindra & Mahindra Ltd.
EMS
STEP 1
Connect the smart tester
Turn the ignition ON
Initialise the diagnostic tool
Record the DTC and clear
Turn ignition OFF
Turn ignition ON
Verify if P0117 is present?
YES Is P0117 present?
NO Is the value =5 ± 0.25
YES Is the value =∞Ω?
V?
MAN-00152
OCT 2011/Rev 1
NO
Intermittent problem exists
Refer the intermittent problem
inspection procedure
YES
Go to STEP 4
NO
Examine the short circuit of
coolant temperature sensor
signal wire to ground
Repair/replace the wiring
harness
Clear the DTC and verify
60