Ems Ecu Programming/Flashing; Reflashing An Existing Ecu - Mahindra Maxximo Mini Van Vx 2012 Diagnostic Manual

Diagnostic Manual
MAXXIMO MINIVAN
The following are the fonts of the alphanumeric characters of the IQA/IMA code, as etched on the injectors.

EMS ECU PROGRAMMING/FLASHING

The EMS ECU required to be flashed in the following conditions –
BLANK ECU
1. Procure blank EMS ECU* from spare part dept.
 *ECU Part No.0315CAU00091N for C 55
- Check for the correct/latest part no in parts catalogue/Technical Service Bulletins.
2. Flash the EMS ECU dataset with a latest dataset as per TSB or at the advice of TEK line.

REFLASHING AN EXISTING ECU

1. Flash the EMS ECU with the correct/latest dataset. The matrix of the vehicles and the related latest
dataset will be released through TSB - if in doubt ask the TEK line.
2. Wrong dataset flashing may result in vehicle not starting and can lead to ECU failure.
Software ECU Type
Version
V30 EDC 17 C55
The reproduction, translation, transmission, in part of or whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution. © 2012 Mahindra &
Mahindra Ltd.
VX
Dataset ID
1037523518.hex(BS-III)
1037523572.hex(BS-IV)
MAN-00183
June 2012
Type Model
Factory
MAXXIMO
MINIVAN
VX
Rev
/ 1
7