Table of Contents
Advertisement
JC-120MC
OS update by means of JetSym
Introduction
Prerequisites
Updating the OS
Jetter AG
The programming tool JetSym offers an easy way to transfer an OS file to the
JC-120MC.
An OS file for the JC-120MC must be available.
A UDP/IP and a TCP/IP connection between programming tool and
JC-120MC is possible.
The number of the IP port is set in the configuration memory as IP basic
port number for JetIP communication.
While booting, the controller must wait for the OS update, or the OS must
already be running.
Note:
Make sure the controller remains energized.
To update the OS, proceed as follows:
Step
1
Select in the JetSym menu Build the menu item Update OS. Alternative:
In the Advanced Configuration dialog of the Hardware Manager, click on
the button Update OS.
Result: The file selection dialog opens.
2
Select the new OS file here.
Result: In JetSym, a confirmation dialog opens.
3
Launch the OS upload by clicking the button Yes.
4
Wait until the update process is completed.
5
To activate the transferred OS, re-boot the controller.
Action
OS update
589
Advertisement
Table of Contents
