The Configuration File - Jetter JC-120MC User Manual

4 Mechanical and electrical installation

The configuration file

Introduction
Properties
File structure
Configuration file -
Example
76
The configuration file config.ini is used to access the configuration memory of
the JC-120MC.

You can access this file through the file system of the JC-120MC.
 For an FTP connection, the user must have administrator or system rights.
 This file is located in the folder System.
 You cannot delete the file, but only overwrite it.
 Formatting the Flash disk drive or the SD card leaves the file unchanged.
The configuration file is a text file the entries of which are grouped into several
sections. The controller replaces missing IP configuration parameters by their
default values.
This is an example of a configuration file config.ini:
;<Productname> System Configuration
;Copyright (c) 2008 by Jetter AG, Ludwigsburg, Germany
[IP]
Address = 192.168. 50.
SubnetMask = 255.255.255.
DefGateway = 192.168. 50. 11
DNSServer = 192.168.
[HOSTNAME]
SuffixType = 0
Name = JetControl120MC
[PORTS]
JetIPBase = 50000
JVMDebug = 52000
[FILES]
AutoCopyIni = /SD/autocopy.ini
1
0
1. 44
Jetter AG