Table of Contents
Advertisement
JC-120MC
Section [FILES]
Changing the
IP configuration
Related topics
Jetter AG
In the [FILES] section, the name of the command file for the AutoCopy
function has been entered.
AutoCopyIni
In the given example
Function
Allowed values
In the event of an illegal
value
Step
1
Create on your PC a configuration file named config.ini using a text editor
and make the corresponding entries.
2
Open an FTP connection between the PC and the JC-120MC.
3
Log in as user with administrator or system rights.
Default login information:
User: admin, Password: admin
User: system; Password: system
4
Browse to directory /System of the JC-120MC.
5
Copy the configuration file named config.ini, which has been created by
you, to the JC-120MC.
6
Clear the FTP connection.
7
Reboot the JC-120MC.
Result:
The new configuration is active.
As an alternative, you can change the IP configuration via the configuration
registers.
The configuration memory (see page 75)
Configuration registers (see page 80)
Mechanical and electrical installation
/SD/autocopy.ini
Command file for the AutoCopy function
Valid name of path and file
/SD/autocopy.ini
Action
79
Advertisement
Table of Contents
