Table of Contents
Advertisement
JC-120MC
MR 2839
MR 2840
Jetter AG
Control character for clearing the screen
This module register contains the ASCII code of the control character which
causes the screen to be cleared.
Module register properties
Values
0 ... 255
Value after reset
95 ('_')
Takes effect
Next time when STX instruction DisplayText() or
DisplayText2() is issued
Control character for clearing the screen up to the end of a line
This module register contains the ASCII code of the control character which
causes the screen to be cleared up to the end of a line.
Module register properties
Values
0 ... 255
Value after reset
36 ('$')
Takes effect
Next time when STX instruction DisplayText() or
DisplayText2() is issued
Programming
329
Advertisement
Table of Contents
