Module Array And Module Codes Of Connected Modules - Jetter JC-120MC User Manual

JC-120MC

Module array and module codes of connected modules

Module array
Registers - Overview
Reading the module
array
Module codes of JX2-I/O
modules
Jetter AG
A unique module code is assigned to each module connected to the
JX2 system bus. The JC-120MC enters all modules detected during
initialization into the module array.
Modules are entered into the module array in the following order:
 First, JX2-I/O, JX2 slave modules, and JetMoves are are entered into the
module array according to their position on the JX2 system bus.
Configured dummy modules are entered here, too.
Then, IP67-I/O modules LioN-S and LJX7-CSL are entered according to

the set module number. Vacant positions between module numbers are
filled with dummy modules.
 Finally, CANopen® modules are entered according to their set module
number. Vacant positions between module numbers are also filled with
dummy modules.
Registers
R 200002015
Index to module array
R 200002016
Module array
The module array is accessed indirectly.
Step
1
Enter the number of the module in the module array into R 200002015
Index to Module Array.
2 Read out the module code from R 200002016 Module Array.
Module code
0 JX2-OD8
1 JX2-ID8
2 JX2-IO16
3 JX2-IA4
4 JX2-OA4
5 JX2-CNT1
6 JX2-PRN1
7 JX2-SER1
9 JX2-TP20-R
Description
Action
Module
8 digital outputs
8 digital inputs
8 digital inputs and 8 digital outputs
4 analog inputs
4 analog outputs
Counter module
Printer Interface Module
Module with serial interface
Module with operating keys
Programming
Description
391