Jetter JC-120MC User Manual page 87

JC-120MC
Effect
Related topics
Jetter AG
Important note:
The EEPROM data on the backplane module allow for 100,000 write cycles.
We urgently recommend the following workflow:
First read out the value, then compare it. Only if the value has changed, start
writing.
Write to register 101299 to have the controller take the following steps:
The controller creates a configuration file out of the values.

It saves the configuration file to the backplane module as

/System/config.ini.
If you have entered comments and formatting details into this file, the

comments and formatting details will get lost during this process.
The configuration memory (see page 75)

Setting the IP address during runtime (see page 88)

Setting the IP address via configuration file (see page 83)

Setting the IP address via configuration file and DIP switch (see

page 84)
Mechanical and electrical installation
87