Jetter JC-120MC User Manual page 269

JC-120MC
MR 1300 ... 1306
MR 1400 ... 1406
Jetter AG
Multiple call
Several nodes using the same GNN have called. Yet, each node must have a
unique GNN.
Meaning of the individual bits
Bit = 0 No error
Bit = 1 Error
Module register properties
Bit number GNN - 1
Type of access Read
The IP settings could not be changed
When the IP settings of a node have been changed, the controller checks
whether the node has taken over these changes.
If the node has not taken over these changes, the controller sets the
respective bit in these registers.
Meaning of the individual bits
Bit = 0 No error
Bit = 1 Error
Module register properties
Bit number GNN - 1
Type of access Read
Programming
269