Interface Cable Kay_0533-0025 - Jetter JC-120MC User Manual

JC-120MC

Interface cable KAY_0533-0025

Introduction
Male connector
specification
(controller end)
Female connector
specification (HMI end)
Specifications of
connecting cable
Cable shielding
Jetter AG
The interface cable KAY_0533-0025 lets you connect HMIs of the type LCD
52, LCD 54 and LCD 54Z to the JC-120MC.
For information on connector specification refer to the list below:
Type
Manufacturer
Item
Recommended core cross section
For information on female connector specification refer to the list below:
Type
Manufacturer
Recommended core cross section
For information on cable specification refer to the list below:
Number of cores
Recommended core cross section
Cable length

Complete shielding, no paired shielding
 The shield must be connected to the connector housings on both ends of
the cable with the greatest possible surface area.
Place the shield as follows:
• Connect the shield by its greatest possible surface area.
• Clamp it under a strain relief.
• Wrap it with copper foil.
Mechanical and electrical installation
8-pin male MiniDIN connector
KYCON
KMDLA - 8P
2
0.128 ... 0.051 mm
15-pin female Sub-D connector in
metallized housing (quality grade 3).
Various manufacturers
2
0.25 ... 0.128 mm
6
2
0.14 mm
0.25 m
123