Jetter JC-120MC User Manual page 244

10 Programming
Configuring and
executing
publish/subscribe
Related topics
244
Parameter
Cycle time
Network nodes are the controller, the communication modules and the bus
nodes.
For details on characteristic features of publish/subscribe, please turn to
chapter Hardware Manager (see page 254).
Publish/subscribe is configured in the JetSym Hardware Manager.
Publish/subscribe is executed by the operating system of the respective
network node:
Publishers and subscribers are configured by means of configuration files

in the file system of the network nodes.
 The configuration file for the publisher is
/SysConfig/JetSync/Publisher.pub.
 The configuration file for the subscriber is
/SysConfig/JetSync/Subscriber.sub.
 Automatic restart of the publishers and subscribers takes place in a
controller at each restart of the application program.
 In the other network nodes, automatic restart of the publishers and
subscribers takes place during the booting phase.
 For applying publishers and subscribers in a controller, an application
program must be executed with at least one task running.
For transferring the configuration, the Hardware-Manager takes the following
steps:
Step
1
Stop all publishers and subscribers.
2
Transfer the configuration files to all network nodes.
3
Restart all publishers and subscribers.
Hardware Manager (see page 254)

Value
1 ... Default: 2 ms
2,147,483,647
ms
Action
Description
Jetter AG