Jetter JC-120MC User Manual page 407

JC-120MC
R 200002039
Jetter AG
I/O module where a peripheral fault has occurred
If the JC-120MC detects a peripheral fault for an I/O module on the
JX2 system bus, it sets the corresponding bit in this register.
Meaning of the individual bits
Bit 0 I/O module 2
1 = I/O module reports a peripheral fault
Bit 1 I/O module 3
1 = I/O module reports a peripheral fault
etc. I/O module 4 ... 24
1 = I/O module reports a peripheral fault
Module register properties
Only value 0 can be entered
Type of access
Value 0 lets you delete the entered value
Programming
407