Initializing By Means Of Lion-S Modules - Jetter JC-24x Version Update

3 Fixed Software Bugs

Initializing by means of LioN-S Modules

Effects of this Bug
Affected Revisions
Remedy / Workaround
Bug Fix
16
In case of CAN system bus configurations consisting of LioN-S and JX2-/JX3
modules, not all connected JX2-/JX3 modules are commissioned.
The following revisions are affected by this bug:
OS revision
Hardware revision
Configuration or operating mode
Comment
Carry out the following steps for a workaround:
Step
1 Start the CAN system bus
2 Re-start the CAN system bus without de-energizing the expansion
modules
Starting from the following revisions this bug has been fixed:
OS revision
Hardware revision
Configuration or operating mode
JX6-SB(-I) < 2.21.0.00
JC-24x < 3.26.0.00
JM-D203-JC24x < 1.13.0.00
not relevant
not relevant
698
Action
JX6-SB(-I) 2.21.0.00
JC-24x 3.26.0.00
JM-D203-JC24x 1.13.0.00
not relevant
not relevant
Jetter AG