Parts And Interfaces Of The Controller Jc-120Mc - Jetter JC-120MC User Manual

JC-120MC

Parts and interfaces of the controller JC-120MC

Parts and interfaces
Jetter AG
The controller JC-120MC features the following parts and interfaces:
Number Part
1 Upper latch
2 X19
3
Backplane module
4
X119
5
Module enclosure
6
DIN rail latch
7
Lower latch
8
X61
9
X10
10
X11
11
X14, X15
12
LED
Product description and design
Description
Lets you remove the module enclosure from
the backplane module
JX2 system bus interface and CANopen®
bus interface
For installing the module on a DIN rail
Connector for additional JX3 modules
For removing the JC-120MC from the DIN rail
Lets you remove the module enclosure from
the backplane module
Not visible in the illustration
SD card slot
Power supply
Serial interface
Two Ethernet ports
Diagnostic and status LEDs
21