Interfaces - Jetter JC-120MC User Manual

4 Mechanical and electrical installation

4.1 Interfaces

Terminal X10
Port X11
Ports X14, X15
Contents
42
The function of terminal X10 is as follows:
Power supply for the controller JC-120MC

Power supply for connected JX3 peripheral modules

The function of port X11 is a serial interface and lets you connect the following
devices:
PC

HMI by Jetter AG

Any device

The function of ports X14 and X15 are Ethernet interfaces and lets you
connect the following devices:
Hub, switch or router

PC

HMI by Jetter AG

JX3-BN-ETH, a JX3-COM-xxxx, or a JetMove-200-ETH

Any device

Topic
Power supply terminal X10 ........................................................................... 43
Serial interface port X11 ................................................................................ 44
Ethernet ports - Female connectors X14, X15 .............................................. 47
Page
Jetter AG