Setting The Length Of The Input Field - Jetter JC-120MC User Manual

JC-120MC

Setting the length of the input field

Setting the length
MR 2813
Jetter AG
The input field length for numerical values is set in MR 2813.
MR 2813 = Number of figures + sign [+ decimal point]
Example:
Number of figures:
Decimal point (MR 2811 = 0):
Field length (MR 2813):
Field length for UserInput
This module register contains the length of the input field.
Module register properties
Values 1 ... 12
Value after reset 11
Takes effect At the next STX instruction UserInput()
6
None
7
Programming
347