Configuration File - Examples - Jetter JC-120MC User Manual

JC-120MC

Configuration file - Examples

Introduction
Minimum configuration
Authentication through
POP3 Log-on
Authentification through
SMTP
Jetter AG
This section contains several examples of the e-mail configuration file
/EMAIL/email.ini.
If no authentication is required and the default value is assigned to the IP port
of the SMTP server, the configuration file must contain only the IP address of
the SMTP server.
[SMTP]
IP = 192.168.40.1
In case the e-mail server requires previous log-on through POP3 and an
e-mail template containing default setting has been defined:
[SMTP]
IP = 192.168.40.1
[POP3]
IP = 192.168.40.1
USER = JetControl4711
PASSWORD = Pop3PassWord
[DEFAULT]
MAILCFG = EmailDefaults.cfg
In case the e-mail server requires an encrypted authentication:
[SMTP]
IP = 192.168.40.1
USER = JetControl0815
PASSWORD = MyPassWord
Programming
431