Jx3 System Bus - Jetter JC-120MC User Manual

JC-120MC
10.12

JX3 system bus

Introduction
Configuration
Connectable modules
Contents
Jetter AG
JX3 modules are directly connected to the JX3 system bus of the controller
JC-120MC or bus node JX3-BN-xxx. The JX3 system bus supports different
modules. Access to these modules is completely transparent.
The JX3 system bus needs not be configured. The controller JC-120MC and
the bus node JX3-BN-xxx are able to automatically detect and commission
connected modules.

JX3 modules
Topic
Module array and module codes of connected modules ............................ 414
Dummy modules on the JX3 system bus ................................................... 416
JX3 system bus - Description of non-volatile registers ............................... 417
Register description - Modules detected on the JX3 system bus .............. 418
Register description - Error logging on the JX3 system bus ...................... 419
Register description - Timeout intervals on the JX3 system bus ................ 421
Register description - Versions of JX3 system bus drivers ........................ 422
Programming
Page
413