Table of Contents
Advertisement
JC-120MC
Jetter AG
Step
The Hardware Manager scans the Jetter Ethernet system bus and
compares the scanned hardware with the currently set hardware.
9
In the window Scanned Hardware, click the name of the controller. In this
example, it is JC-350.
The Hardware Manager has the tree of the controller JC-350 displayed in
the bottom window.
10
Click the button Apply.
The window closes. The Hardware Manager has taken over the hardware
parameters.
11
Check the result of the automatic hardware scan.
Initial commissioning
Action
133
Advertisement
Table of Contents
