Sequence - HP 16554A Programmer's Manual

TTRigger (TTRace) Subsystem

SEQuence

SEQuence
Command :MACHine{1|2}:TTRigger:SEQuence <number_of_levels>
The SEQuence command defines the timing analyzer trigger sequence. First
it deletes the current sequence, then it inserts the number of levels specified,
with default settings. The number of levels can be between 1 and 10 when
the analyzer is armed by the RUN key.
In timing analyzers, the trigger is always the last level.
integer from 1 to 10
<number_of_
levels>
Example
OUTPUT XXX;":MACHINE1:TTRIGGER:SEQUENCE 4"
Query :MACHine{1|2}:TTRigger:SEQuence?
The SEQuence query returns the current sequence specification.
Returned Format
[:MACHine{1|2}:TTRigger:SEQuence] <number_of_levels>,
<level_of_trigger><NL>
Example
OUTPUT XXX;":MACHINE1:TTRIGGER:SEQUENCE?"
12–18