Remove; Width - HP 16554A Programmer's Manual

SYMBol Subsystem

REMove

REMove
Command :MACHine{1|2}:SYMBol:REMove
The REMove command deletes all symbols from a specified machine.
Example
OUTPUT XXX;":MACHINE1:SYMBOL:REMOVE"

WIDTh

Command
:MACHine{1|2}:SYMBol:WIDTh <label_name>,
<width_value>
The WIDTh command specifies the width (number of characters) in which
the symbol names will be displayed when symbols are used.
The WIDTh command does not affect the displayed length of the symbol
offset value.
string of up to 6 alphanumeric characters
<label_name>
integer from 1 to 16
<width_value>
Example
OUTPUT XXX;":MACHINE1:SYMBOL:WIDTH 'DATA',9 "
15–8