Tminimum; Tposition - HP 16554A Programmer's Manual

TWAVeform Subsystem

TMINimum

TMINimum
Query :MACHine{1|2}:TWAVeform:TMINimum?
The TMINimum query returns the value of the minimum time between the X
and O markers. If there is no valid data, the query returns 9.9E37.
Returned Format
[:MACHine{1|2}:TWAVeform:TMINimum] <time_value><NL>
real number
<time_value>
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:TMINIMUM?"

TPOSition

Command
MACHine{1|2}:TWAVeform:TPOSition
{STARt |CENTer | END | DELay, <time_val> |
POSTstore, <percent>}
The TPOSition command allows you to control where the trigger point is
placed in the acquisition. The trigger point can be placed at the start, center,
end, at a percentage of post store, or at a value specified by delay. The post
store option is the same as the User Defined option when setting the trigger
point from the front panel.
The TPOSition command is only available when the acquisition mode is set to
manual.
real number that varies by sample period
<time_val>
integer from 1 to 100
<percent>
Example
OUTPUT XXX;":MACHINE2:TWAVEFORM:TPOSITION CENTER"
13–24