HP 16554A Programmer's Manual page 24

Programming the HP 16554A/ HP 16555A/HP 16555D
Mainframe Commands
MENU Command/query
The MENU command selects a new displayed menu. The first parameter (X)
specifies the desired module. The optional, second parameter specifies the
desired menu in the module. The second parameter defaults to 0 if it is not
specified. The query returns the currently selected and displayed menu.
For the HP 16554A/HP 16555A/HP 16555D Logic Analyzers:
•
X,0 — State/Timing
Configuration
•
X,1 — Format 1
•
X,2 — Format 2
•
X,3 — Trigger 1
•
X,4 — Trigger 2
•
X,5 — Waveform 1
•
X,6 — Waveform 2
•
X,7 — Listing 1
If a machine is turned off, its menus are not available. The Mixed Display is
available only when one or both analyzers are state analyzers.
SELect Command/query
The SELect command selects which module or intermodule will have parser
control. SELect 0 selects the intermodule, SELect 1 through 5 selects
modules A through E respectively. Values −1 and −2 select software options
1 and 2. The SELect query returns the currently selected module.
STARt Command
The STARt command starts the specified module. If the specified module is
configured for intermodule (group run), STARt will start all modules
configured as part of the intermodule run.
1–6
•
X,8 — Listing 2
•
X,9 — Mixed Display
•
X,10 — Compare 1
•
X,11 — Compare 2
•
X,12 — Chart 1
•
X,13 — Chart 2
•
X,14 — SPA 1
•
X,15 — SPA 2