HP 85105A mm-Wave Controller
Equipment Needed But Not Supplied
Equipment Needed But Not Supplied
You need the following equipment to troubleshoot your instrument. This
equipment is not supplied as part of the system.
•
1 point Pozidriv
•
2 point Pozidriv
•
Service Adapter
•
3.5 mm precision female to female adapter
•
5/16 in. Torque Wrench
•
HP 436A Power Meter
•
HP 8485A Power Sensor
•
HP 847SC Negative Detector
•
HP 1740A Oscilloscope, or equivalent
•
HP 8498C 10 dB Fixed Attenuator
Troubleshooting Sequence
Figure 6-7 on page 6-21 illustrates the troubleshooting sequence that can be
used to determine which assembly is faulty.
6-20 HP 85106D mm-Wave System