Xcondition; Xotag - HP 16554A Programmer's Manual

XCONdition

Command :MACHine{1|2}:TLISt:XCONdition {ENTering|EXITing}
The XCONdition command specifies where the X marker is placed. The
X marker can be placed on the entry or exit point of the XPATtern when in
the PATTern marker mode.
Example
OUTPUT XXX; ":MACHINE1:TLIST:XCONDITION ENTERING"
Query
:MACHine{1|2}:TLISt:XCONdition?
The XCONdition query returns the current setting.
Returned Format
[:MACHine{1|2}:TLISt:XCONdition] {ENTering|EXITing}<NL>
Example
OUTPUT XXX;":MACHINE1:TLIST:XCONDITION?"

XOTag

Query
:MACHine{1|2}:TLISt:XOTag?
The XOTag query returns the time from the X to the O marker. If there is no
data the query returns 9.9E37.
Returned Format
[:MACHine{1|2}:TLISt:XOTag] <XO_time><NL>
real number
<XO_time>
Example
OUTPUT XXX;":MACHINE1:TLIST:XOTAG?"
TLISt Subsystem
XCONdition
14–19